DSEUltra DSE701 Generator Controller

Auto & Manual Start Control Module

The DSE701 is available in Manual and Auto Start versions, offering an excellent range of engine monitoring and protection features.
The module has been designed to monitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input.
It also has the capability to monitor battery charging by utilising the WL terminal on the charge alternator. When the module detects a fault condition it automatically shuts down the engine.
The DSE702 is available in Manual and Auto Start versions including all the features of the DSE701 plus a tamper proof engine hours counter.
Both modules include a remote start signal input. This input allows the module to be started from a pre- defined remote location.

Main Features

• Manual start
• Engine pre-heat
• Engine monitoring and protection features
• Protected solid state (PSS) outputs
• Front panel mounting
• Remote start
• LED indicators

Benefits

• Multiple engine parameters are monitored simultaneously

Operation

Manual Mode:

• The module is started using the on-board key/buttons
• The user turns the key to the hand position
• The engine pre-heat button is then pressed for the required time
• The start button is then pressed to start the engine
• To stop the engine the key needs to be turned to the off position

Automatic Mode:

• The key needs to be permanently left in the hand position
• The module is powered up by the remote start signal
• The pre-heat function is automatically carried out and then the engine is started
• To stop the engine the remote switch is turned to the ‘off’ position

Important Notes

• When ordering you must specify whether you require the Manual or Auto version.

Alternative / Associated Products DSE702 – Auto & Manual Start Control Module