|
|
 |
DSE3110
Manual/Auto Start Control Module
$199.00
The module monitors engine speed, frequency, voltage and engine run hours and also displays the warning and shutdown status. The module includes fixed and flexible outputs as well as configurable inputs making this product ideal for a wide variety of applications. The module can either be programmed using the front panel or by using the DSE Configuration Suite PC software.
The module is available in two variants:
1. CAN – For use with electronic engines only.
- Optional frequency (Hz) sensing from main AC alternator for genset applications.
2. MPU/ALT. – For use with non-electronic engines only (magnetic pick-up/alternator sensing).
- Optional frequency (Hz) sensing from main AC alternator for genset applications.
- Optional Magnetic Pickup speed sensing.
KEY FEATURES
- Back-lit icon LCD Display
- Front panel editing
- LED and LCD alarm indication
- Power Save mode
- CAN- and Magnetic Pick-up/ Alt. versions available (Specify on ordering)
- PC configurable
- 6 Digital Inputs
- 4 Outputs (2 configurable on Magnetic Pic up/Alt, 4 configurable on CAN version)
- Alternative configuration
- Alternative configuration
- Configurable timers and alarms
- Remote Start input
- Generator voltage display
- Generator frequency display
- Battery voltage display
- Engine speed display
- Hours counter
- Engine pre-heat
- Comprehensive shutdown or warning on fault condition
KEY BENEFITS
- Tamper-proof hours counter provides accurate information for monitoring and maintenance periods
- Multiple engine parameters are monitored simultaneously
- Module can be configured to suit individual applications
- Suitable for engine only applications
- Compatible with a wide range of CAN engines
- Uses DSE Configuration Suite PC software for simplified configuration
- IP65 rating (with optional gasket) offers increased resistance to water ingress
- Licence-free PC software
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE RATING
8-35 volts Continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 ms providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.
CHARGE FAIL / EXCITATION
8 V to 35 V fixed power source 2.5 W
NOMINAL STANDBY CURRENT
23 mA at 12 V, 18 mA at 24 V
MAXIMUM OPERATING CURRENT
35 mA at 24 V
OUTPUTS
OUTPUT A (FUEL)
2 A DC at supply voltage
OUTPUT B (START)
2 A DC at supply voltage
AUXILIARY OUTPUTS C & D
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15 V - 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK-UP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
DIMENSIONS
OVERALL
98 mm x 79 mm x 40 mm
3.9" x 3.1" x 1.6"
PANEL CUT-OUT
80 mm x 68 mm
3.1" x 2.7"
MAXIMUM PANEL THICKNESS
8 MM
0.3"
8 MM
0.3"
MAXIMUM PANEL THICKNESS
8 mm
0.3”
