USA & Canada

* Financing Available

Home / Commercial Generators / 25,000 Watt Diesel Generator

25,000 Watt Diesel Generator
Heavy Duty

Perkins Engine Powered 

This is one tough generator! It can be lifted with a crane or fork lift truck using the the pockets in the base.  

Starting From

$13,920.00 USD

$18,166.00 CAD

Sku: AGi25P-HD

*Shown with optional canopy enclosure

GENERAL SPECIFICATONS

General Specifications

Model

AGi25P-HD

Power

25,000 Watts Standby
25,000 Watts Prime

Engine

Perkins 404D-22TG | 1800 RPM | Turbodiesel
44.7 HP | Four-Cylinder | Water-Cooled | 2.2 L

Output Options

120/240 Volt Single Phase
120/208 Volt Three Phase
277/480 Volt Three Phase

380/600 Volt Three Phase

Alternator

Maintenance Free, Automatic Voltage Regulated

Instrumentation & Control

DynaGen TG350 Generator Controller
Auto-start, two-wire start, field reconfigurable

Standard Features

Silenced Exhaust System, Easy Oil Drain Valve, Vibration Isolators, Generator Control Panel, Added Temperature Sender, Main Circuit Breaker, Starter Battery, Cables and Cold Start Glow Plugs

Optional Features

- Steel Canopy Enclosure with central lifting, forklift channels, locks on all doors with a tough powder coated finish.
- Trailer Enclosure (does not require steel canopy enclosure)

- Circulation Pump Heater
- Remote Monitoring

- Large Capacity Fue Tank

Approvals

EPA, CSA SPE-1000, Alternator UL/CSA

Dimensions

73" x 40" x 49"

Weight

1,350 lbs

ENGINE

PERKINS 404D-22TG

The 404 model is a compact four cylinder 2.2 litre diesel motor that runs at 1800 RPM. Just like all other Caterpillar/Perkins engines, it will run full or part-time for days or weeks at a time, only needing an oil change ever 500 hours of use.

Engine Specifications

Model

404D-22TG

Power

33.3 kWm | 29.0 kWe Standby

Cylinders

4

Cycle

4 Stroke

Aspiration

Turbo Diesel

Combustion System

Indirect injection

Displacement

2.216 litres

Cooling System

Water Cooled

Coolant Capacity

9.3 litres | 2.4 US gal

Oil Capacity

10.6 litres | 2.8 US gal

Warranty

Manuals

ALTERNATOR

Industrial grade brushless and maintenance free alternators produce constant clean power you can depend on. The alternators are designed for continuous use and are UL/CSA approved.

 

INSTRUMENTATION & CONTROL

DynaGen TG350 Genset Controller

DynaGen controllers make using your generator easy. Place it to Automatic or manually turn your generator on and off with the push of one button. The display provides easy to read generator instrumentation. An event log keeps track of operation and can be set to alert you when it is time to change the oil.

 

The DynaGen "tough" series controllers are intended to operate even in harsh conditions, without fail. Simple two wire start makes them compatible with any standard transfer switch or remote starting system.

Controller Specifications

Make

DynaGen

Model

TG350

Features

Instrumentation, protection and control.

Auto-Start

Manual / Auto two-wire start

Setup

Pre-programmed and field re-configurable with password protection

Exercise and Maintenance

Maintenance Engine Timer, Exerciser

Display

Easy to read display. Shows all generator parameters, timers and settings

Generator Protection

Warnings and safety shut-down

Power

Low standby power consumption <60mA

Electromagnetic Compatibility

Meets or exceeds MIL-STD-461E Conducted Emissions

Memory

Warranty

5 years or 17,500 hours

Downloads

CANOPY ENCLOSURE

Optional

Acoustic weather enclosure uniquely designed to be strong, compact, aesthetically pleasing and to reduce noise while maintaining proper ventilation.

 

  • - Galvannealed Steel Enclosure
  • - All Stainless Steel Fasteners
  • - Powder Coated Finish
  • - Acoustic Foam Insulated
  • - Lockable Hinged Doors
  • - Weather Stripping
  • - Central Lifting Point
  • - Forklift Channels

WIRING

AURORA uses stronger nylon insulated terminals instead of traditional vinyl. Terminals are double crimped to deliver additional tensile strength and strain relief against wire pull-out. Heat-shrink with an adhesive creates a water barrier so that no corrosion can occur.

 

Where even a small degradation in a connection may be critical, DEUTSCH DT environmentally sealed connectors are used.

CONSTRUCTION

  • Steel Skid Base
  • Forklift Lifting Channels
  • Central LIfting Point
  • Powder Coated Finish
  • All Stainless Steel Fasteners