Advanced Engine Control Panel
Upgrade, Replace, or Refurbish | Designed for mechanically and electronically governed engines.
Industrial, Mining, Construction, Pumping, Irrigation, Power Generation, Marine Engine Control, Mobile Equipment, Mining, Irrigation and more.
10.59 x 8.59 x 5.11 in.
268.99 x 218.19 x 129.79 mm
|Country of Origin:||Canada|
Engine & Generator Control
Why Choose an Aurora Control Panel?
As a manufacturer of diesel generators, we understand how time-consuming and costly failures can be. Downtime can cost hundreds of dollars. Failure is just not an option. To reduce the likelihood of it happening, we designed and built our engine panels using years of experience around industrial equipment. In a way, we are our own customer. We demand better quality for our own generators, and we know you would demand the same for your equipment. This is likely why you are here. Perhaps you are building your own product or upgrading an existing one. Aurora Engine Control Panels like this one may be just what you are looking for.
We use Tough Series DynaGen engine and generator controllers that offer complete monitoring and control. Setup is easy, field programmable without any special tools or software. There is very little our control panels can't do. So, if you are not sure if it is the right fit for you, contact us!
RUGGED & BUILT TO LAST
Aurora enclosures are UL508A listed (Standard for Industrial Control Panels), waterproof, and UL94V-0 flame rated. The tough Polycarbonate design is weather resistant and designed for outside or indoor use.
- Designed to IP66/IP68* of IEC 529 and NEMA 1, 2, 3, 3R, 4, 4X, 5, 6/6P*, 12 and 13 specifications.
- It can wall or frame mounted using vibration isolation if required.
- Weather and chemical resistant.
- Uses Liquid Tight Deutsch 21 Pin Receptacles
- Able to withstand vibrations
Tough Series Controllers
Built To Survive - Performs To Extremes.
DynaGen Controllers are built tough and tested to higher SAE standards than others. Tough Series controllers use superior automotive-grade plastics, high heat laminates for the circuit boards, and resilient silicon front panel buttons. They protect themselves from power dips, surges, vibration, and thermal shock. They are built to perform consistently in the most extreme environments.
Tough Series controllers are backed by a 5-year warranty, giving you peace of mind and saving you time and money. It is the longest warranty in the industry!
Diesel Engines or Generators
The TG410 Controller provides complete control, protection and engine instrumentation for both standard and electronic CAN Bus engines, as well as metering for generator applications.
The controller can be easily configured using either the front panel buttons or FREE PC configurator software. The TG410 is ideally suited for severe duty applications where reliability is critical, such as mobile or stationary engine equipment and generators.
Advanced Monitoring & Control
The TG410 provides displays of Oil Pressure, Engine Temperature, Fuel Level, Oil Level, Engine Hours, RPM and Battery Voltage as well as J1939 Diagnostic Trouble Codes and a 150 Event Log. Two customer-defined sensor parameters for temperature, pressure, voltage or levels can also be configured. For generator applications, the TG410 provides a display of 3-Phase AC voltage, 3-Phase AC current, and frequency. A Modbus communications port is standard on the TG410 model, allowing connection of a remote annunciator or an Internet gateway for remote management. For applications requiring
Engine Wiring Harness
The military, aerospace, battlefield operations and marine industry all use DEUTSCH connectors. In extreme conditions that include high-temperature, vibration and the need for liquid proof connections, DEUTSCH is the number one choice. Aurora carries a wide selection of DEUTSCH components, cables and wiring harness to make hooking up your engine easy.
Have a question?
Parts and Wiring Diagram
Typical Wiring Diagram for Genset Controller
Aurora Engine Control Panels
We Also Recommend