The DynaGen™ 200 compact controller is ideal for the manual or autostart operations of electronically or mechanically governed engines on small portable equipment and machinery. It offers six inputs and three outputs and supports CANbus J1939 and Modbus RS-485 messages. The rugged IP67-rated housing can withstand the harsh environments mobile and rental equipment endure and is Tier 4F and Euro Stage V compliant. A high-resolution colour display provides an intuitive, user-friendly interface for configurations and utilizes a multi-level PIN-based menu for security. Private-label branding is available for OEMs.
 
Highlights
 
A compact controller for manual and autostart operations for complete control, monitoring and protection for electronically and mechanically governed engines 
 
Rugged, IP67-rated for water and dust ingress protection 
Tier 4F and Euro Stage V compliant 
Patented QR code diagnostics through RemoteIQ™ QR-Assist 
Intuitive, user-friendly menus accessible via a high-resolution colour display 
 
Features
 
Rugged 2.8” QVGA sunlight viewable color display
Multilevel PIN-based menu access
Configure the controller through intuitive display menus
Advanced throttling capabilities
Customizer software allows users to create, modify and save configuration files and load them onto the panel via the USB
Six Inputs
- Engine RPM (Tach, DC Alternator, AC Frequency, Mag Pickup)
- Two (one high and one low impedance) analog inputs
- One (4-20mA, 0—5V, variable resistance 0-240Ω, variable resistance 0-5000Ω, switch to ground) configurable analog input
- Three digital inputs: Switched to VBAT, GND, Open or Closed (tri-stating)
Three Outputs
- Three 1A high-side switched outputs
Configurable increments and manual ramp rate for throttle controls
Configurable seven-stage auto ramp profile
Software configurable resistors for J1939 CAN and serial Modbus
 
TECHNICAL DATA
 
Electrical
Operating Voltage: 6-36 Volts DC
Standby Current: 60mA @ 12 VDC, 38 mA @ 24 VDC
Surge & Dump Load: SAEJ1113-11
Reverse Polarity: Yes
 
Inputs/Outputs
 
Inputs
Three analog inputs:
one high impedance
one low impedance
one configurable (4-20mA, 0—5V, variable resistance 0-240Ω, variable resistance 0-5000Ω, switch to ground)
Three digital inputs:
Switched to VBAT, GND, Open or Closed (Tri-stating)
 
Outputs
3 switched outputs:
1A high side switches, logic level driven capable
 
Speed Sensing
J1939 CANbus, magnetic pick-up, tachometer or AC voltage
 
MECHANICAL DATA
 
Display: 2.8” QVGA color display
Weight: 0.55 lbs (0.45 kg)
Dimensions: 4.0 in x 4.0 in x 2.0 in (10.6 x 10.6 x 5.08 cm)
Protection: IP67-rated
Operating Temperature: -20° to +70° C (-4° to +158° F)
Vibration & Shock: Composite vibration profile simulating five years of field operation SAE1455: Random profile for engine-mounted panels on all three axes SAE J1455: Swept sine on all three axis
 
COMMUNICATIONS
SAE J1939
RS-485
USB - Yes