Menu
Cart 0

Air Condensation Heater

Help prevent condensation from forming inside your generator

Condensation forming on machined surfaces and electrical components can cause damage to your generator. Keeping the air temperature warmer than the dew point outside can prevent it from happening.

Model:  130609-00
Power Rating: 1,200 Watts
Voltage: 120 Volts AC

Daily temperature changes can result in condensation forming on windings insulation, control panels, machined surfaces and in your fuel tank.  These damp or wet conditions cause your generator to corrode faster.  Water also causes electricity to go places it's not supposed to go.  While generators manufacturers take extra care to protect devices from water, it is in the air, and the generator is not air tight.

Fan heaters are designed to prevent the formation of condensation and ensure an evenly distributed interior air temperature in enclosures. The heater is connected using the internal terminal connectors. The desired temperature can be set and maintained by the integrated thermostat, and the high-performance axial fan provides forced air circulation. The heater design minimizes side surface temperatures of the housing. The small size of this heater makes it ideal for use in generator enclosures and other places where space is at a premium

Model 130609-00
Heating Element PTC Resistor - Temperature limiting
Overheat protection Built-in temperature limiter
Heating Capacity 1200W
Operating Voltage 100-120 VAC, 50/60 Hz
Max. Current (Inrush) 16.0A
Air Flow (free blowing) 94 cfm (160 m3/h)
Thermostat Range 32° to 140°F (0° to 60°C)
Axial Fan, Ball Bearing Service life 50,000 h at 77°F (25°C)
Connection 2-pole terminal 14 AWG max. (2.5 mm2), with strain relief, clamping torque 0.8 Nm max
Housing Plastic, UL 94V-0, black
Mounting Clip for 35 mm DIN rail, EN 60715 or M6 screws (not included)
Mounting Position Vertical (exhaust up)
Recommended Mounting Distance 1.97 in. (50 mm) sides and bottom 3.94 in. (100 mm) above
Operating/Storage Temperature -49° to 158°F (-45° to 70°C)
Protection Class II (double insulated)
Protection Type IP20
Approvals CE, UL Recognized File No. E150057,RoHS compliant

Anti Condensation Heater | 1200 Watt | 120 Volt

  • $299.00



We Also Recommend